x64 | 文件大小解压后: 1.38 GB

描述:SOFiSTiK Analysis + Design
SOFiSTiK Analysis + Design可以让你直接在Autodesk Revit中进行建筑结构分析和构件设计。该应用程序提供了一个完整的有限元分析和设计工作流程–从模型一致性检查到混凝土构件(如板、柱和梁)的代码检查。结构分析可以在3D中进行–允许对结构刚度进行真实的模拟,并可选择考虑施工顺序。此外,二维和三维子系统可与自动荷载取值相结合。可以对构件进行分组,并相应地在极限状态和使用极限状态下进行设计。计算和设计报告将自动生成。结果可以在Revit中进行可视化管理,也可以通过导出到Excel功能转移到电子表格中进行进一步处理。SOFiSTiK分析+设计软件支持全面的协作功能,可以在Revit中实现无缝的结构分析工作流程。当与SOFiSTiK 2021一起安装时,该应用程序将增强为一个Revit界面,用于完整的SOFiSTiK FEA。

SOFiSTiK Bridge Modeler支持桥梁设计和详图中的BIM。该应用允许用户在Autodesk Revit中使用对齐参数和通用族创建参数化的三维桥梁模型。该产品由软件本身和内容组成,包括用于上层结构和下层结构创建的通用族。这些族可以很容易地修改或从头开始创建,以满足当地和公司的标准。还可以创建额外的桥梁设备元素,如护栏和栏杆。自动生成剖面图、顶视图、纵向剖面图和标高点–帮助用户详细描述和记录他们的结构。

SOFiSTiK加固详图能显著加快在Autodesk Revit中从三维模型中创建二维加固板的速度。该产品由软件和一组族组成,可以很容易地修改以满足当地或公司的标准。此外,还包括创建钢筋表、弯曲表和线网的切割表。

SOFiSTiK钢筋生成软件根据计算分析和设计结果,在Autodesk Revit内部自动生成三维钢筋模型。钢筋模型提供了一个自动生成的钢筋布局建议,该建议可以满足钢筋的要求,并可以自由修改。来自施工规范和公司标准的设计要求可以通过用户定义的规则进行控制,类似于专家系统中的方法。现有加固与所需加固的对比可视化,可以清楚地显示是否已经提供了足够的加固。

SOFiSTiK BiMTOOLS是一套适用于Autodesk Revit的免费工具,它可以将视图的制作效率提高50%。功能一览–替换字体类型;读出坐标;创建元素视图;元素定位;自动标注尺寸;选择性标记;隐藏不需要绘制的类别;开口高度;模板区域;复制安装部件;指定主机标记。

SOFiSTiK 3D-PDF Export通过生成标准的PDF文档,嵌入3D图形,扩展了Autodesk Revit的功能。3D-PDF文件可以被任何支持PDF 1.6标准的PDF阅读器打开,如Adobe Reader 7.0或更新版本。SOFiSTiK 3D-PDF导出使用元素的几何定义来创建U3D格式的模型等价物。嵌入了关于特定Revit对象的描述性信息。

功能一览
-使用对齐信息或从外部文件导入的数据(如LandXML格式)创建3D桥轴。
-使用参数化轮廓和轴线几何学创建桥梁上部结构部件。
-根据给定的布局创建多梁桥构件。
-使用通用系列创建桥梁子结构组件。
-根据给定的布局,沿轴线创建桥梁组件阵列。
-创建桥梁设备元素,如护栏和栏杆。
-轴线、上层结构、下层结构、护栏和栏杆的完全参数化。
-自动生成带尺寸的剖面图和带对齐信息的顶视图。
-自动生成带有垂直对准信息的纵向剖面图。
-为轴和桥的边缘创建曲线尺寸。
-创建轴心链的注释
-创建带高程点的表格
-或者从SOFiSTiK桥梁项目数据库中创建一个三维实体模型。
-创建用户定义的肌腱。
-在Revit中检查分析模型,具有全面的警告对话框和显示选项,用于扩展模型的检查。
-强大的自动啮合与先进的公差设置(例如,忽略小的开口)。
-在Revit中进行高级结构建模,例如:下立梁、驼峰梁、板对墙边缘的释放。
-使用有限元法直接在Revit中进行三维线性结构分析。
-先进的计算选项,如自重的施工阶段。
-使用Revit水平仪或手动选择自动支持条件生成3D和2D有限元子系统。
-计算各层子系统之间的垂直荷载承担量。
-通过自动和可定制的映射机制,确保材料、横截面和载荷组合符合规范。
-在Autodesk Revit中管理和设计符合欧洲标准的钢筋混凝土构件(板、柱、梁,例如符合DIN EN 1992)。
-结果包或可通过 “导出到Excel “工具分享。
-所有信息都保存在*.rvt文件中,确保全面支持协作工作流程。
-可定制的内容包,以达到个人标准。
-操作模式。每个项目的标记,-片或-主机。
-根据额外的标准设置标记,如运行长度、未弯曲、耦合器等。
-可定制的加固计划和织物板的切割清单。
-根据布局将钢筋归入一个特定的SOFiSTiK钢筋容器。
-复制钢筋的所有注释、细节、尺寸和相关视图。
-对钢筋组和布片的数量进行SOFiSTiK乘法。
-SOFiSTiK可变钢筋组的分段长度。
-根据设定的钢筋长度和拼接或使用分界线来分割钢筋组或形状。
-细节工具,用于指示钢筋布局、-钢筋端部、-层等。
-钢筋或布料形状细节,以表示部分钢筋组或整个标记。
-根据各种国家标准进行形状代码检测。
-楼层、墙体和基础板的钢筋层功能。
-浏览钢筋和布片的标记。
-在复杂形状和面的元素中分配钢筋。
-根据给定的长度创建弯曲的织物行。
-修改加固板和相应的时间表。
-冻结/解冻加固的几何形状和属性。
-将BVBS加固数据导出为*.abs文件用于折弯机。

Revit 2021的新功能
-菜单 “轴 “中的新功能。约束,在放置之间,从投影开始。
-在一个步骤中创建多个上层建筑组件 “中继器”
-轻松访问编辑命令
-新的参数化与形状处理点。
-二级轴的改进
-编辑护栏和栏杆的功能。
改进了Revit中板的设计工作流程–现在可以直接在Revit中分析和设计柱、梁和板。
-在Revit中实现分析和设计结果的可视化,而无需安装其他软件。
-新命令用于从所有分析和设计任务中创建累积报告,并导出为PDF和Word。
-扩大了分析检查的范围,以检测和报告运动不稳定性。
-允许使用和进一步配置任意多边形截面形状的梁和柱族。
-通过附加组件扩展Dynamo接口,例如,访问预应力筋的几何数据或读取成员的设计结果。

BIM APPS列表。
分析+设计 v6.0.333
Bridge + Infrastructure Modeler v6.0.164
补强细节 v6.0.163
强化生成 v5.0.49
BiMTOOLS v5.0.58
3D-PDF导出 v5.0.26

兼容性:Autodesk Revit 2021 (x64)

x64 | File Size: 1.38 GB

Description:
SOFiSTiK Analysis + Design enables you to perform structural analyses of buildings and member design directly in Autodesk Revit. The App provides for a full Finite Element Analysis and design workflow – from model consistency checks to code checking for concrete members like slabs, columns, and beams. Structural analyses can be performed in 3D – allowing for realistic simulation of the structural stiffness and optional consideration of the construction sequence. Additionally 2D and 3D subsystems can be adopted in combination with an automatic load takedown. Members can be grouped and accordingly designed in Ultimate and Serviceability Limit States. Calculation and design reports will be generated automatically. Results can be visualized and managed in Revit or be transferred to spreadsheets for further processing using the Export to Excel function. Together with the full support of collaboration features, SOFiSTiK Analysis + Design enables a seamless structural analysis workflow within Revit. When installed with SOFiSTiK 2021 the app enhances into a Revit interface for the full SOFiSTiK FEA.

SOFiSTiK Bridge Modeler supports BIM in Bridge Design and Detailing. The application allows users to create parametrized 3D bridge models using alignment parameters and generic families in Autodesk Revit. The product consists of the software itself and content including generic families for super- and substructure creation. These families can be easily modified or created from scratch to meet local and company standards. Additional bridge equipment elements such as parapets and railings can also be created. Automatic generation of section views, top views, longitudinal sections, and elevation points-assists users in detailing and documenting their structures.

SOFiSTiK Reinforcement Detailing significantly accelerates the creation of 2D reinforcement sheets out of 3D models in Autodesk Revit. The product consists of software and a set of families, which can easily be modified to meet local or company standards. Creation of bar lists, bending schedules and cut lists for wire meshes is included as well.

SOFiSTiK Reinforcement Generation automatically generates a 3D rebar model inside of Autodesk Revit based on computed analysis and design results. The rebar model provides an automatically generated proposition of reinforcement layout which fulfils the reinforcement requirement and which can be freely modified. Design requirements from construction codes and company standards can be controlled by user-defined rules similar to the approach used in expert systems. Visualization of existing reinforcement vs. required reinforcement provides a clear indication whether adequate reinforcement has been provided.

SOFiSTiK BiMTOOLS are a set of free tools for Autodesk Revit which enhances the productivity for elaborations of views up to 50%. Functionalities at a glance – Substitution of Font Type; Read out of Coordinates; Create Views of Elements; Positioning of Elements; Automatic Dimensioning; Selective tagging; Hiding of categories not to be plotted; Altitude of Openings; Formwork area; Copy mounting parts; Assign the mark of the host.

SOFiSTiK 3D-PDF Export extends the functionalities of Autodesk Revit through the generation of standard PDF documents with embedded 3D graphics. The 3D-PDF files can be opened by any PDF reader that supports the PDF 1.6 standard, such as Adobe Reader 7.0 or later. SOFiSTiK 3D-PDF Export uses the geometric definition of the elements in order to create an equivalent representation of the model in U3D format. Descriptive information about the particular Revit objects is embedded.

Functionalities at a glance
-Creates 3D Bridge Axis using alignment information or imported data from external files (e.g. LandXML format)
-Creates bridge superstructure components using parametric profiles and axis geometry
-Creates multi girder bridge components according to given layout
-Creates bridge substructure components using generic families
-Creates bridge component array along an axis according to given layout
-Creates bridge equipment elements, like parapets and railings
-Fully parametric for axis, superstructures, substructures, parapets and railings.
-Automatic generation of section views with dimensions and top view with alignment information
-Automatic generation of longitudinal section representation with vertical alignment information
-Creates curved dimensions for axis and bridge edges
-Creates annotations of axis chainage
-Creates table with elevation points
-Alternatively creates a 3D solid model from a SOFiSTiK bridge project database
-Creates user defined tendons.
-Check of the analytical model in Revit with comprehensive warning dialog and display options for an extended check of the model
-Powerful automatic meshing with advanced tolerance settings (eg. to ignore small openings)
-Advanced structural modelling within Revit with for instance: downstand beam, haunched beam, release for slab-to-wall edges
-Perform 3D linear structural analysis directly in Revit using the Finite Element Method
-Advanced calculation options such as construction phases for selfweight
-Generate 3D and 2D Finite Elements subsystems with automatic support conditions using Revit levels or by manual selection
-Calculate the vertical load takedown between level subsystems
-Ensure code compliant materials, cross sections and load combinations with the automatic and customizable mapping mechanism
-Manage and Design reinforced concrete elements to the Eurocodes within Autodesk Revit (slabs, columns, beams e.g. to DIN EN 1992) Results directly available in Revit as
-Results Packages or ready to share via the Export to Excel tool
-All information is saved in the *.rvt file ensuring a full support of collaboration workflows
-Customizable Content Packs in order to reach individual standards.
-Operational Modes: Marks per project, – sheet or – host.
-Set Marks according to additional criteria’s like running length, not bent, couplers etc.
-Customizable reinforcement schedules and cut lists for fabric sheets.
-Group bars to a specific SOFiSTiK Rebar Container according its layout.
-Copy Reinforcement with all annotations, details, dimensions and related views.
-SOFiSTiK Multiplier for the quantity of Rebar Sets and Fabric Sheets.
-Stagger segment lengths of SOFiSTiK Variable Rebar Set.
-Split Rebar Sets or – Shapes according to set stock length and splice or using dividing lines.
-Detailing tools to indicate the rebar layout, – bar ends, – layers, etc.
-Rebar or Fabric Shape Details to represent the partial rebar set or the entire mark.
-Shape Code detection according to various national standards.
-Reinforcement Layer functionality in floors, walls and foundation slabs.
-Browse through the marks of rebars and fabric sheets.
-Distribute reinforcement in elements with complex shapes and faces.
-Creation of bent fabrics rows according to a given length.
-Revisions for reinforcement sheets and corresponding schedules.
-Freeze/Unfreeze of reinforcement geometry and properties.
-Export BVBS reinforcement data as *.abs file for bending machine.

New Features for Revit 2021
-New features in menu “Axis”: Constrain, Between Placements, From Projection
-Create multiple superstructure components in one step “Repeater”
-Easy access to edit commands
-New parametrization with shape handle Points
-Improvements for secondary axis
-Edit functionality for parapets and railings
-Improved workflow for design of slabs in Revit – columns, beams and slabs can now be analysed and designed directly inside Revit
-Visualization of analysis and design results in Revit without installation of additional software
-New command to create a cumulative report from all analysis and design tasks performed with export to PDF and Word
-Extended the analytical check to detect and report kinematic instabilities
-Allow usage and further configuration of beam and column families of arbitrary polygonal cross sectional shape
-Extended Dynamo interface by additional components e.g. to access geometry data of prestressing tendons or to read design results of members

BIM APPS List:
Analysis + Design v6.0.333
Bridge + Infrastructure Modeler v6.0.164
Reinforcement Detailing v6.0.163
Reinforcement Generation v5.0.49
BiMTOOLS v5.0.58
3D-PDF Export v5.0.26

Compability:Autodesk Revit 2021 (x64)

Functionalities at a glance
-Creates 3D Bridge Axis using alignment information or imported data from external files (e.g. LandXML format)
-Creates bridge superstructure components using parametric profiles and axis geometry
-Creates multi girder bridge components according to given layout
-Creates bridge substructure components using generic families
-Creates bridge component array along an axis according to given layout
-Creates bridge equipment elements, like parapets and railings
-Fully parametric for axis, superstructures, substructures, parapets and railings.
-Automatic generation of section views with dimensions and top view with alignment information
-Automatic generation of longitudinal section representation with vertical alignment information
-Creates curved dimensions for axis and bridge edges
-Creates annotations of axis chainage
-Creates table with elevation points
-Alternatively creates a 3D solid model from a SOFiSTiK bridge project database
-Creates user defined tendons.
-Check of the analytical model in Revit with comprehensive warning dialog and display options for an extended check of the model
-Powerful automatic meshing with advanced tolerance settings (eg. to ignore small openings)
-Advanced structural modelling within Revit with for instance: downstand beam, haunched beam, release for slab-to-wall edges
-Perform 3D linear structural analysis directly in Revit using the Finite Element Method
-Advanced calculation options such as construction phases for selfweight
-Generate 3D and 2D Finite Elements subsystems with automatic support conditions using Revit levels or by manual selection
-Calculate the vertical load takedown between level subsystems
-Ensure code compliant materials, cross sections and load combinations with the automatic and customizable mapping mechanism
-Manage and Design reinforced concrete elements to the Eurocodes within Autodesk Revit (slabs, columns, beams e.g. to DIN EN 1992) Results directly available in Revit as
-Results Packages or ready to share via the Export to Excel tool
-All information is saved in the *.rvt file ensuring a full support of collaboration workflows
-Customizable Content Packs in order to reach individual standards.
-Operational Modes: Marks per project, – sheet or – host.
-Set Marks according to additional criteria’s like running length, not bent, couplers etc.
-Customizable reinforcement schedules and cut lists for fabric sheets.
-Group bars to a specific SOFiSTiK Rebar Container according its layout.
-Copy Reinforcement with all annotations, details, dimensions and related views.
-SOFiSTiK Multiplier for the quantity of Rebar Sets and Fabric Sheets.
-Stagger segment lengths of SOFiSTiK Variable Rebar Set.
-Split Rebar Sets or – Shapes according to set stock length and splice or using dividing lines.
-Detailing tools to indicate the rebar layout, – bar ends, – layers, etc.
-Rebar or Fabric Shape Details to represent the partial rebar set or the entire mark.
-Shape Code detection according to various national standards.
-Reinforcement Layer functionality in floors, walls and foundation slabs.
-Browse through the marks of rebars and fabric sheets.
-Distribute reinforcement in elements with complex shapes and faces.
-Creation of bent fabrics rows according to a given length.
-Revisions for reinforcement sheets and corresponding schedules.
-Freeze/Unfreeze of reinforcement geometry and properties.
-Export BVBS reinforcement data as *.abs file for bending machine.

New Features for Revit 2021
-New features in menu “Axis”: Constrain, Between Placements, From Projection
-Create multiple superstructure components in one step “Repeater”
-Easy access to edit commands
-New parametrization with shape handle Points
-Improvements for secondary axis
-Edit functionality for parapets and railings
-Improved workflow for design of slabs in Revit – columns, beams and slabs can now be analysed and designed directly inside Revit
-Visualization of analysis and design results in Revit without installation of additional software
-New command to create a cumulative report from all analysis and design tasks performed with export to PDF and Word
-Extended the analytical check to detect and report kinematic instabilities
-Allow usage and further configuration of beam and column families of arbitrary polygonal cross sectional shape
-Extended Dynamo interface by additional components e.g. to access geometry data of prestressing tendons or to read design results of members

BIM APPS List:
Analysis + Design v6.0.333
Bridge + Infrastructure Modeler v6.0.164
Reinforcement Detailing v6.0.163
Reinforcement Generation v5.0.49
BiMTOOLS v5.0.58
3D-PDF Export v5.0.26

Compability:Autodesk Revit 2021 (x64)